Ludwigshafen, Germany – BASF is expanding its growing portfolio of bio-based monomers with a proprietary process for production of 2-Octyl Acrylate (2-OA). The new product underlines BASF’s strong commitment to innovation for a sustainable future with 73% 14C-tracable bio-based content according to ISO 16620. Besides the regular bio-based 2-Octyl Acrylate, BASF also launched the new product as 2-Octyl Acrylate BMB ISCC Plus. Here, the remaining carbon content is ISCC PLUS certified, and by applying BASF’s biomass balance (BMB1) approach, this variant offers a further reduced product carbon footprint (PCF2).
With an industrial-scale production setup at its Verbund site in Ludwigshafen, Germany, BASF has a pioneering role when it comes to producing 2-Octyl Acrylate in large volumes. This allows BASF to make the bio-based monomer globally available as a raw material. “We have broadened our product portfolio to support customers on their sustainability journey. With 2-OA, we are proud to have launched a novel acrylic monomer that helps customers to meet their sustainability goals," says Dr. Reiner Geier, Senior Vice President Industrial Petrochemicals Europe.
BASF’s 2-Octyl Acrylate uses 2-Octanol as the respective bio-based feedstock. This bio-alcohol is based on castor oil, a sustainable non-edible feedstock which is reliably available throughout the year.
With its balanced solvency, 2-Octyl Acrylate can easily be used as bio-based alternative to fossil-based monomers such as 2-Ethylhexyl Acrylate (2-EHA) and n-Butyl Acrylate (BA) e.g. in adhesives formulations, or coatings applications.
The new product also offers performance benefits compared to fossil alternatives, showing improved scrub resistance in coatings, shear resistance in adhesives and excellent weatherability. Therefore, 2-Octyl Acrylate is one of the few bio-based monomers which can be used in both standard and high-performance applications. The high purity of BASF’s 2-Octyl Acrylate provides a reliably high quality, with low volatile organic compounds (VOC) and enables customers to use the monomer in a broad application range.
BASF’s 2-Octyl Acrylate is already registered in the EU, the US, Japan and many other countries. Further registrations are ongoing.
About BASF’s Petrochemicals division
The Petrochemicals division is the starting point for BASF’s petrochemical-based value chains globally. We operate a highly competitive asset base with best-in-class technologies and set the benchmark in safety, sustainability, operational excellence and cost competitiveness. With six Verbund sites and several major production sites, we are close to our customers and present in the largest chemical markets worldwide. The division supplies various value chains across the company and a broad range of customer industries with high-quality chemicals, putting our customers in the center of everything we do and contributing to the organic volume growth of BASF. Our portfolio includes cracker products, industrial gases, acrylics, superabsorbent polymers, styrenic foams, alkylene oxides, glycols, alcohols, solvents and plasticizers. In 2022, the Petrochemicals division generated sales to third parties of about €10.6 billion. Further information is available online at http://petrochemicals.basf.com.
About BASF
At BASF, we create chemistry for a sustainable future. We combine economic success with environmental protection and social responsibility. More than 111,000 employees in the BASF Group contribute to the success of our customers in nearly all sectors and almost every country in the world. Our portfolio comprises six segments: Chemicals, Materials, Industrial Solutions, Surface Technologies, Nutrition & Care and Agricultural Solutions. BASF generated sales of €87.3 billion in 2022. BASF shares are traded on the stock exchange in Frankfurt (BAS) and as American Depositary Receipts (BASFY) in the United States. Further information at www.basf.com.
1) Find out more about BASF’s biomass balance approach at: https://www.basf.com/global/en/who-we-are/sustainability/we-drive-sustainable-solutions/circular-economy/mass-balance-approach/biomass-balance.html
2) BASF’s product carbon footprint (PCF) calculations comply with the requirements and guidance provided by ISO 14067:2018. A methodology review carried out by TÜV Rheinland Energy GmbH has certified that the PCF methodology SCOTT that was developed and is used by BASF SE for calculating the PCFs of BASF products complies with ISO 14067:2018 and reflects the state of the art. In addition, it is proven that the PCF calculations for the biomass balance products, which is used to decrease the PCF cradle-to-gate to zero or lower, is following the requirements of the respective ISO standards 14040 & 14044 (H. K. Jeswani, 2019. A methodology for integrating the biomass balance approach into life cycle assessment with an application in the chemicals sector. Science of the Total Environment 687, 380-391).
BASF offers range of chemical intermediates with product carbon footprint significantly below global market average
Analysis comprising product-specific emissions from cradle to gateMarket comparison reveals good position for a range of intermediates
Read MoreBASF and Evonik agree on first deliveries of biomass-balanced ammonia with reduced carbon footprint
BASF and its customer Evonik have agreed on the first delivery of BASF’s ammonia BMBcertTM grade. Thereby, both chemical companies demonstrate their commitment to offer products with a reduced product carbon footprint (PCF). With its ammonia BMBcert, BASF delivers to Evonik a product whose PCF is at least 65 % lower than the standard product*. Both, BASF and Evonik are extending their product portfolios and launching ammonia-based products applying a biomass balance approach. These products are readily available via existing sales channels and fully integrated into the ERP (Enterprise Resource Planning) systems of the companies.“Evonik and BASF share the same vision: We are convinced that the chemical industry can transform and replace fossil with renewable feedstocks and utilities. The supply with ammonia BMBcert is a big milestone for both of us,” said Dr. Jens Aßmann, Vice President Business Management Ammonia Value Chain and Operations Amino Resins at BASF. Evonik has received a first shipment of ammonia BMBcert produced by BASF. By incorporating BASF’s ammonia BMBcert into its ISCC (International Sustainability and Carbon Certification) PLUS certified production processes, Evonik demonstrates its commitment to a more sustainable economy and its ambitious emissions reduction targets. By 2030, Evonik seeks to reduce Scope 1 and 2 emissions by 25 % and Scope 3 emissions by 11 % compared to 2021 levels, and to become climate-neutral by 2050, in line with the Paris Agreement and validated by Science Based Target Initiative (SBTi). Evonik plans to use ammonia BMBcert to produce a range of sustainable products, including VESTAMIN® IPD eCO and VESTAMID® eCO Polyamide 12. “eCO” stands for Evonik’s aim to eliminate CO2 via mass balance approach using renewable feedstock in existing systems and production processes. With the eCO grades, customers benefit from more sustainable products with no compromise in performance. Thus, conventional, trusted VESTAMIN curing agents for epoxy resin systems with typical applications in industrial flooring, marine and anticorrosive paints can easily be replaced by the IPD eCO grade. The same proves true for VESTAMID eCO Polyamide 12, which covers tailored, high-performance polyamide, typically found in shoe soles, sunglasses, gas pipes, safety-related automotive parts and many more. “We are excited to partner with BASF to source ammonia with a reduced carbon footprint. This collaboration witnesses our dedication to environmental stewardship and our ability to innovate in a rapidly changing market,” said Silvia Torrado, Global Procurement Director for Base Petrochemicals at Evonik.BASF applies a biomass balance approach to replace fossil resources at the beginning of the production process with certified biomethane from biowaste raw materials which are attributed to the product. The mass-balanced product is certified according to ISCC PLUS standards. In addition, BASF is using electricity from renewable sources for the manufacturing of the ammonia, further reducing its PCF. As outlined in its sustainability roadmap, the BASF Monomers Division announced to offer at least one circular or lower PCF option for every major product line by 2025. Mass balanced products are drop-in solutions, meaning they have the same properties as the corresponding conventional products, but with an attributed share of circular raw materials. The division’s sustainable offerings are an essential part of BASF’s path to climate neutrality and net-zero CO2emissions by 2050. * Based on the average CO2 footprints stated in the “Default values for the transitional period for the CBAM between October 1, 2023 and December 31, 2025” published by the European Commission on Dec 22, 2023.
Read More