Bitumen additive B2Last® makes roads more durable – and road construction more sustainable

June 23, 2020

  • Better performance, lower emissions
  • Innovative BASF additive protects people and the environment along the whole process chain

The number of heavy vehicles on the roads is increasing and climate change causes more extreme weather conditions. Roads are subjected to even higher loads, usually requiring replacement after ten to twelve years. An innovative bitumen additive from BASF has been designed to make roads last longer. BASF has spent several years developing the additive together with the Institute of Highway Engineering in Aachen, and is now available under the name B2Last®. The product’s aim is already reflected in its name: “bitumen to last”. “We expect an extension of the average road life span by up to 50 percent,” said Dag Wiebelhaus, responsible Head of Product Innovation in the Monomers operating division.

The new additive works differently than conventional bitumen modifiers. It binds components in the bitumen to form a strong yet elastic polymer grid. This makes roads more durable and therefore truck tires do not trigger rutting as quickly during hot spells. Studies have demonstrated that the asphalt remains stable even when ambient temperatures are 10 to 15 degrees Celsius higher than usual - an essential aspect as summers become warmer. At the same time, the road surface still has enough elasticity to prevent cracking at cold temperatures. “Roads, that are replaced less frequently, not only reduce costs. Fewer road construction sites also means fewer traffic jams,” emphasized Otto Kumberger, Head of Strategy in the Monomers operating division at BASF.

The use of the new additive also enables the reduction of bitumen emissions during road construction, since asphalt mix production and laying can be carried out at 135 to 145 degrees Celsius and not at 160 or 180 degrees as otherwise usual. “Measurements from an independent laboratory show that the bitumen vapors and aerosols, to which the road construction workers are exposed, drop by up to 65 percent,” reported the project manager Michael Zeilinger. The innovative additive thus helps to already partially fulfill the new occupational exposure limit during asphalt laying. In Germany this limit was recently reduced from 10.0 to 1.5 milligrams per cubic meters.

 

Additionally, the new bitumen additive allows significant CO2 savings – not only because it permits less frequent repair of the roads and less energy at asphalt mix production. When B2Last is used, a large proportion of reclaimed asphalt, i.e. recycled asphalt, can be added to the asphalt mixture. This means that less new material has to be produced, normally requiring high levels of energy and resources causing CO2 emissions. Experiences gathered from various paving trials, including the construction of a test section on the A96 highway near Munich, have confirmed this. “We have seen that B2Last chemically interlinks the aged and virgin bitumen in an effective manner,” explained the project manager Michael Zeilinger. “At the same time, a high proportion of reclaimed asphalt  still allows excellent homogeneity and processability of the mixture.”

On behalf of BASF, the Institute for Transport Systems and Infrastructure of the Karlsruhe University of Applied Sciences has carried out a life cycle analysis on the basis of laboratory tests and model calculations for B2Last provided by the Institute of Highway Engineering of the RWTH Aachen University. It showed that the use of B2Last can save up to 46 percent CO2 emissions and up to 37 percent primary resources. And the product can also convince in terms of economical benefits with a cost saving potential of up to 24 percent for an expected life cycle of the asphalt base layer of 60 years. Longer road life time, excellent workability of the asphalt mix, lower CO2 emissions and improved health protection: The new development promises numerous positive effects. “It is no exaggeration to say that B2Last can make road construction more sustainable,” summed up Head of Strategy Kumberger.

To learn more about B2last in Europe – go to www.B2Last.com and https://youtu.be/orlv0ZMYTtY; to learn more about B2Last in North America – go to https://b2last.basf.us/.

About BASF

 

At BASF, we create chemistry for a sustainable future. We combine economic success with environmental protection and social responsibility. More than 117,000 employees in the BASF Group work on contributing to the success of our customers in nearly all sectors and almost every country in the world. Our portfolio is organized into six segments: Chemicals, Materials, Industrial Solutions, Surface Technologies, Nutrition & Care and Agricultural Solutions. BASF generated sales of €59 billion in 2019. BASF shares are traded on the stock exchange in Frankfurt (BAS) and as American Depositary Receipts (BASFY) in the U.S. Further information at www.basf.com.

Recent Posts

BASF offers range of chemical intermediates with product carbon footprint significantly below global market average

Analysis comprising product-specific emissions from cradle to gateMarket comparison reveals good position for a range of intermediates

Read More

BASF and Evonik agree on first deliveries of biomass-balanced ammonia with reduced carbon footprint

BASF and its customer Evonik have agreed on the first delivery of BASF’s ammonia BMBcertTM grade. Thereby, both chemical companies demonstrate their commitment to offer products with a reduced product carbon footprint (PCF). With its ammonia BMBcert, BASF delivers to Evonik a product whose PCF is at least 65 % lower than the standard product*. Both, BASF and Evonik are extending their product portfolios and launching ammonia-based products applying a biomass balance approach. These products are readily available via existing sales channels and fully integrated into the ERP (Enterprise Resource Planning) systems of the companies.“Evonik and BASF share the same vision: We are convinced that the chemical industry can transform and replace fossil with renewable feedstocks and utilities. The supply with ammonia BMBcert is a big milestone for both of us,” said Dr. Jens Aßmann, Vice President Business Management Ammonia Value Chain and Operations Amino Resins at BASF. Evonik has received a first shipment of ammonia BMBcert produced by BASF. By incorporating BASF’s ammonia BMBcert into its ISCC (International Sustainability and Carbon Certification) PLUS certified production processes, Evonik demonstrates its commitment to a more sustainable economy and its ambitious emissions reduction targets. By 2030, Evonik seeks to reduce Scope 1 and 2 emissions by 25 % and Scope 3 emissions by 11 % compared to 2021 levels, and to become climate-neutral by 2050, in line with the Paris Agreement and validated by Science Based Target Initiative (SBTi). Evonik plans to use ammonia BMBcert to produce a range of sustainable products, including VESTAMIN® IPD eCO and VESTAMID® eCO Polyamide 12. “eCO” stands for Evonik’s aim to eliminate CO2 via mass balance approach using renewable feedstock in existing systems and production processes. With the eCO grades, customers benefit from more sustainable products with no compromise in performance. Thus, conventional, trusted VESTAMIN curing agents for epoxy resin systems with typical applications in industrial flooring, marine and anticorrosive paints can easily be replaced by the IPD eCO grade. The same proves true for VESTAMID eCO Polyamide 12, which covers tailored, high-performance polyamide, typically found in shoe soles, sunglasses, gas pipes, safety-related automotive parts and many more. “We are excited to partner with BASF to source ammonia with a reduced carbon footprint. This collaboration witnesses our dedication to environmental stewardship and our ability to innovate in a rapidly changing market,” said Silvia Torrado, Global Procurement Director for Base Petrochemicals at Evonik.BASF applies a biomass balance approach to replace fossil resources at the beginning of the production process with certified biomethane from biowaste raw materials which are attributed to the product. The mass-balanced product is certified according to ISCC PLUS standards. In addition, BASF is using electricity from renewable sources for the manufacturing of the ammonia, further reducing its PCF. As outlined in its sustainability roadmap, the BASF Monomers Division announced to offer at least one circular or lower PCF option for every major product line by 2025. Mass balanced products are drop-in solutions, meaning they have the same properties as the corresponding conventional products, but with an attributed share of circular raw materials. The division’s sustainable offerings are an essential part of BASF’s path to climate neutrality and net-zero CO2emissions by 2050. * Based on the average CO2 footprints stated in the “Default values for the transitional period for the CBAM between October 1, 2023 and December 31, 2025” published by the European Commission on Dec 22, 2023.

Read More